Home > Hard Drive > How To Slave A Sata Hard Drive In Windows 7

How To Slave A Sata Hard Drive In Windows 7


to boot from ATA (or PATA), do as Xifon said, det your bios to boot from ATA first, then SATA. I tried to look for it last night but could not find it (it was 1am so my eyes could be failing on me). We explain everything you need to know. The jumper block adjacent to the SATA interface connector on SATA 150MB/s drives is for factory use only. http://martop.net/hard-drive/how-to-slave-a-sata-hard-drive.html

You will need to reinstall Windows. Usually, the BIOS will attempt to boot from each drive in order, which means you can set your DVD drive to first and the hard drive on which Windows is installed The computer doesn't see it. Jun 25, 2014 SATA master IDE slave Apr 21, 2007 IDE master, Sata slave Dec 19, 2007 SATA, Master and Slave. http://www.techspot.com/community/topics/how-to-set-up-sata-hd-as-slave-to-a-ata-master.81167/

How To Slave A Sata Hard Drive In Windows 7

Right now, the SATA drive is C: and is SYSTEM.The IDE HD is listed as F: ACTIVE.I am not sure what u mean when u ask me to check disk type? As far as I know, Windows sets the first partition of the boot drive as C:, regardless of master/slave/SATA/SCSI/whatever. And, is the first partition set as C: if it doesn't contain an OS??? I downloaded a freeware copy program that copied C: but I don't think that's enough as it says during boot attempt that the file(s) " WINDOWS\SYSTEM32\CONFIG\SYSTEM " is/are missing.

Jan 29, 2006 Help understanding SATA and master/slave configuration (laptop) Jun 1, 2011 SATA Master With ATA Slave? For more information, including step-by-step instructions, see: Install an extra hard disk in your PC and How to install an SSD in your PC Tags: PC Upgrades Share this article Share If that's the case, go to your BIOS. Sata Hard Drive Slave Jumper Setting Ask a new question Read More Hard Drives SATA Storage Related Resources solved SATA to PATA, Master/Slave configuration?

hdds. Similar Topics SATA drives ... Jun 6, 2007 Add New Comment You need to be a member to leave a comment. find more Sep 18, 2005 #2 (You must log in or sign up to reply here.) Show Ignored Content Topic Status: Not open for further replies.

Use a spare SATA drive as extra storage in your PC By Jim Martin | 01 Aug 13 Share Tweet Send  Hi. How To Connect Two Sata Hard Disk In One Pc Several functions may not work. Already have an account? You may also...

Master Slave Hard Drive Setup

Disconnect the IDE and boot to WinXP. check these guys out thank you VERY much! --Makani Sep 18, 2005 #1 Mictlantecuhtli TS Evangelist Posts: 4,345 +11 Welcome to TechSpot, Makani Well, SATA doesn't have masters or slaves, just one drive How To Slave A Sata Hard Drive In Windows 7 ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: Connection to failed. How To Slave A Hard Drive I was considering buying Acronis's true Image program and there was a link thru the Seagate prog.

Ask a question and give support. http://martop.net/hard-drive/how-to-clone-a-hard-drive-windows-7.html Report • #5 OtheHill January 5, 2009 at 16:47:59 Format the IDE drive and then disconnect the drive and only have the SATA drive connected. What exact hard drive model is the SATA?Do you have the SATA drive connected to SATA I port? Every drive is essentially the same, but this means you need to tell the motherboard's BIOS which drive to boot from. How To Install A Second Sata Hard Drive

If you want to play some more and what I just suggested doesn't work then try setting the BIOS for RAID on SATA I&2 and see how that works. The computer doesnt even see the new hard drive, becuase there is no master or slave ATA to begin with. All Rights ReservedAd Choices The information on Computing.Net is the opinions of its users. Check This Out I choose S and then i put the floppy disk in and then it says select the SCSI adapter u want from the list.

Below is an excerpt form the Seagate site.A Note on Jumpers and CablingSerial ATA interface disk drives are designed for easy installation. Sata Master Slave My system does not see the new SATA HD at all, unless I looked at all the wrong places. It is not necessary to set any jumpers, terminators, or other settings on this drive for proper operation.

You may also...

Comments Comments Android Wear 2.0 release date and new features: Google lists smartwatches getting upgraded 1995-2015: How technology has changed the world in 20 years Intel's next-gen Cannonlake chips "will be Already have an account? I used to be able to figure this out easy in my old PC in the BIOS when I was using PATA..... Sata Multipliers For example, a modern SSD is likely to support the SATA III standard, also known as SATA 6.0Gb/s.

Report • #14 caes4 January 6, 2009 at 17:43:56 yea, it is basic healthy C and yes ide was disconnected.connecting the IDE will cause the IDE to boot first and thus Join thousands of tech enthusiasts and participate. the OS. this contact form loading c: windowsother than that problem, it worked OK.But its annoying because It said that everytime, even though windows was only installed on the D drive.

Either via Cable Select (drive position must be on the end of an 80 wire 40 pin cable usually on IDE Primary Channel connector) or by Master select (drive position must Since picking up Acronis I found out that West. Wouldn't hurt to take the IDE drive completely out of the boot order either. It says I can not format a System drive.

Report • Start a discussion Ask Your QuestionEnter more details...Thousands of users waiting to help!Ask now Weekly Poll Have you used Facebook's "Safety Check" during an emergency? The drives are numbered 0-3 rather than 1-4, but the BIOS default is most likely that the lowest numbered one is checked first for a boot drive; or it could be Computing.Net cannot verify the validity of the statements made on this site. I saw this on PC Advisor and thought you should see it too.

Jul 5, 2007 Installing an IDE drive as a slave with SATA as master Aug 7, 2007 IDE slave with SATA master on Vista Apr 6, 2007 SATA drives ... All Rights Reserved. The jumper block adjacent to the SATA interface connector on SATA 300MB/s drives can be used to force the drive into SATA 150MB/s mode for use with older SATA controllers that Simply turn on your PC, press the Del key a few times (or look for a message telling which key to press to enter Setup) and the BIOS should appear.

© Copyright 2017 martop.net. All rights reserved.